IBM HS20 User Guide - Page 73
error, messages
UPC - 087944983033
View all IBM HS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
POST error messages The following table provides an abbreviated list of the error messages that might appear during POST. See "Diagnostics" in the blade server Hardware Maintenance Manual and Troubleshooting Guide on the IBM BladeCenter Documentation CD or the IBM BladeCenter T Documentation CD that comes with the blade server for more information about the POST error messages. Table 3. Abbreviated list of POST error messages POST message Failing device or problem found Suggested action 161 The real-time clock battery has failed. Replace the battery yourself or call for service. 162 A device configuration has changed. Make sure that your optional devices are turned on and installed correctly. Note: If you are unable to start the Configuration/Setup Utility program, view the system event log in the management module. 163 The time of day has not been set. Set the correct date and time. 289 A failing DIMM was disabled. Make sure that the memory is correct for your blade server and that it is installed properly. 301 Keyboard and keyboard controller v Make sure that the keyboard/mouse/video select button LED on the front of the blade server is lit, indicating 303 that the blade server is connected to the shared keyboard. v Make sure that the keyboard cable is connected to the BladeCenter unit and nothing is resting on the keyboard keys. 962 Parallel port configuration error Start the Configuration/Setup Utility program and make sure that the parallel-port setting is correct. 11xx Serial port error Make sure that the serial cable is connected correctly. 1162 Serial port configuration conflict Start the Configuration/Setup Utility program and make sure that the IRQ and I/O port assignments needed by the serial port are available. 1800 PCI adapter hardware interrupt Start the Configuration/Setup Utility program and make sure that the interrupt resource settings are correct. 2400 2462 Video controller and memory v Make sure that the keyboard/mouse/video select button LED on the front of the blade server is lit, indicating that the blade server is connected to the shared monitor. v Make sure that the monitor is connected correctly to the BladeCenter unit. 00019xxx Processor x is not functioning or failed the built-in test. Make sure that processor x is installed correctly. If the problem remains, replace processor x. 00180xxx A PCI adapter requested a resource that is not available. Start the Configuration/Setup Utility program and make sure that the resources needed by the PCI adapter are available. 01295085 The blade server failed the ECC-checking hardware test. Have the system board serviced. 012980xx Data for processor x Download and install the latest level of BIOS code. 012981xx 01298200 Microprocessor speed mismatch Install microprocessors with identical speeds. Chapter 6. Solving problems 59