IBM HS20 User Guide - Page 80
Light, diagnostics, table
UPC - 087944983033
View all IBM HS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Light path diagnostics table Use Table 5 to help determine the cause of the error and the action you should take. Power is available to relight the light path diagnostics LEDs for a short period of time after the blade server is removed from the BladeCenter unit. During that period of time, you can relight the light path diagnostics LEDs for a maximum of 25 seconds (or less, depending on the number of LEDs that are lit and the length of time the blade server is removed from the BladeCenter unit) by pressing the light path diagnostics button. The light path diagnostics power present LED (CR111) lights when the light path diagnostics button is pressed if power is available to relight the blade-error LEDs. If the light path diagnostics power present LED does not light when the light path diagnostics button is pressed, no power is available to light the blade-error LEDs, and they will be unable to provide any diagnostic information. Note: The illustrations in this document might differ slightly from your hardware. Processor mismatch error LED (CR110) Processor 2 error LED (CR13) NMI error LED (CR17) Temperature error LED (CR31) System board error LED (CR30) Light path diagnostics power present LED (CR111) Reserved (SW3) Light path diagnostics button (SW4) IDE bus 1 error LED (CR14) IDE bus 2 error LED (CR28) DIMM 1 error LED (CR3) Processor 1 error LED (CR12) DIMM 2 error LED (CR5) DIMM 3 error LED (CR4) DIMM 4 error LED (CR6) 66 BladeCenter HS20 Type 8832: Installation and User's Guide