Icom IC-F8101 Instruction Manual - Page 15
■ Scan function, ■ Mode selection, For your reference
View all Icom IC-F8101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
BASIC OPERATION 2 ■ Scan function The scan function repeatedly scans programmed channels. This function is convenient to check for calls on multiple channels. q Push [ ] to start a scan. • "Scanning" and the Scan type are displayed. Quick Reference [Stop] w When a signal is received, the scan pauses on that channel. e Push [Stop](§§) to cancel the scan. • Pushing [ ] also cancels the scan. 1 NOTE: The scan resume setting, the action after receiving a signal, can be changed by the "Voice 2 Scan Resume" item of "Setmode." (Main Menu > Setmode > Config) 3 4 ■ Mode selection The following modes are selectable in the IC-F8101: LSB, USB, CW, AM, RTTY, LSBD1/2/3 and USBD1/2/3. NOTE: Only the preprogrammed operating modes are selectable. The selectable operating mode can be changed in the "Mode" item of "Setmode." (Main Menu > Setmode) 5 qqSelect the Display mode. q Push [8] to enter the Main Menu screen. 6 w Push [r] or [s] to select "Channel" or "VFO," and then push [4]. 7 8 9 w Push [Mode](3) one or more times to select the desired mode. 10 • The selected mode icon appears at the top of the display. NOTE: 11 • On the Memory Channel display, the selected operating mode can be used only temporarily. When the channel is changed, the transceiver 12 returns to the preprogrammed operating mode. • Depending on the transceiver version or preprogramming, some operating modes may not be 13 selectable or usable except in receive. 14 DDFor your reference Mode LSB, USB LSBD1, USBD1 LSBD2, USBD2 LSBD3, USBD3 TX/RX offset frequency [Hz] 1500 (Fixed) 1500, 1650, 1800 1500, 1650, 1800 1500, 1650, 1800 RX filter band width [Hz] 100 to 3000 (100Hz step) Default settings are shown in bold. Modulation input MIC PTT ON MODEM PTT ON TC4, ACC, USB TC4, ACC, USB MIC TC4, ACC, USB TC4, ACC, USB 15 16 17 9