Icom IC-F8101 Instruction Manual - Page 78

■ RMK-6 (Optional Separation kit)., Supplied Accessories, Separation

Get Icom IC-F8101 PDF manuals and user guides View all Icom IC-F8101 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

6 CONNECTION AND INSTALLATION ■ RMK-6 (Optional Separation kit) The RMK-6 allows you to install the IC-F8101's Front panel separately from the Main unit for added installation convenience and operation. Use either the optional OPC-607, OPC-608, OPC-609 or OPC726 separation cable with the RMK-6. The RMK-6 is the same as the one supplied in the Separated type transceiver. D Supplied Accessories D Separation The optional OPC-607 (3 m; 9.8 ft), OPC-608 (8 m; 26.2 ft), OPC-609 (1.9 m; 6.2 ft) or OPC-726 (5 m; 16.4 ft) separation cable is required for separately installing the transceiver Front panel and Main unit. q First, make sure the transceiver's power is OFF, then disconnect the DC power cable. w Remove the knob bolts and mounting bracket from the RMK-6. RMK-6 with Mounting bracket Flat washers (M5) Mounting screws Cable clamps (M5 × 12 mm) (ScrewsɹM2.6 × 5 mm) Spring washers (M5) Self-tapping screws Hex socket screws (M5 × 16 mm) Nuts (M5) Screws (M3 × 8 mm) e Unscrew the 4 hex socket screws using an allen wrench, then remove the Front panel from the transceiver in the direction of the arrow. • Separate the RMK-6's Front panel attachment and Main unit attachment in the same way. Transceiver RMK-6 r Disconnect the connection cable from the Front panel. Connection cable Main unit Front panel Connection cable Front panel 72

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
72
6
CONNECTION AND INSTALLATION
The RMK-6 allows you to install the IC-F8101’s Front
panel separately from the Main unit for added installa-
tion convenience and operation. Use either the optional
OPC-607, OPC-608, OPC-609 or OPC726
SEPARATION
CABLE
with the RMK-6.
The RMK-6 is the same as the one supplied in the
Separated type transceiver.
D
Supplied Accessories
Flat washers
(M5)
RMK-6 with Mounting
bracket
Spring washers
(M5)
Mounting screws
(M5 × 12 mm)
Cable clamps
(Screws
M2.6 × 5 mm)
Self-tapping screws
(M5 × 16 mm)
Screws
(M3 × 8 mm)
Hex socket screws
Nuts
(M5)
D
Separation
The optional OPC-607 (3 m; 9.8 ft), OPC-608 (8 m;
26.2 ft), OPC-609 (1.9 m; 6.2 ft) or OPC-726 (5 m;
16.4 ft)
SEPARATION
CABLE
is required for separately in-
stalling the transceiver Front panel and Main unit.
q
First, make sure the transceiver’s power is OFF,
then disconnect the DC power cable.
w
Remove the knob bolts and mounting bracket from
the RMK-6.
e
Unscrew the 4 hex socket screws using an allen
wrench, then remove the Front panel from the trans-
ceiver in the direction of the arrow.
• Separate the RMK-6’s Front panel attachment and Main
unit attachment in the same way.
RMK-6
Transceiver
r
Disconnect the connection cable from the Front
panel.
Front panel
Connection cable
Connection cable
Main unit
Front panel
■
RMK-6 (Optional Separation kit)