Icom IC-F8101 Instruction Manual - Page 84

■ Connector information, Pin name, Description, Specification

Get Icom IC-F8101 PDF manuals and user guides View all Icom IC-F8101 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

6 CONNECTION AND INSTALLATION ■ Connector information ACC 11 6 1 15 10 5 Pin Pin name Description Specification 1 CI-V - - 2 AF IN Input terminal for the AF signal. Input sensitivity (Data mode): More than 52.5 W at 100 mV 3 AF OUT Output terminal for the AF signal. Output level: 2 00 to 400 mVrms when receiving Data mode 4 AF GND Ground line for the AF signal. - 5 GPS RXD Input terminal for receive data from GPS unit. NMEA0183 6 NC - - 7 RELAY Goes to ground when transmitting. Less than 100 mV 8 EALC ALC voltage input. Control sensitivity (at -3 V input): More than 40 dB suppression 9 MODPTT PTT input terminal. When grounded, transmits. Input voltage: L ess than 0.8 V for transmit 10 CW KEY CW and FSK keying input. CW: Less than 0.6 V for transmit RTTY: Open=Mark 11 EALARM Output terminal for the Alarm signal. Output current: 12 mA±10% Open collector 12 GND Connect to ground. - 13 NC - - 14 NC - - 15 NC - - ATU 6 9 1 5 Pin Pin name Description 1 KEY Key signal input. 2 START Start/bypass signal output. 3 13.8V 13.8 V output for Antenna tuner. 4 13.8V 13.8 V output for Antenna tuner. 5 GND Connect to ground. 6 GND Connect to ground. 7 NC - 8 NC - 9 NC - Specification - - 13.8 V, maximum 2 A 13.8 V, maximum 2 A - - - - - 78

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
78
6
CONNECTION AND INSTALLATION
■
Connector information
ATU
Pin
Pin name
Description
Specification
1
5
6
9
1
KEY
Key signal input.
—
2
START
Start/bypass signal output.
—
3
13.8V
13.8 V output for Antenna tuner.
13.8 V, maximum 2 A
4
13.8V
13.8 V output for Antenna tuner.
13.8 V, maximum 2 A
5
GND
Connect to ground.
—
6
GND
Connect to ground.
—
7
NC
—
—
8
NC
—
—
9
NC
—
—
ACC
Pin
Pin name
Description
Specification
1
CI-V
—
—
2
AF IN
Input terminal for the AF signal.
Input sensitivity (Data mode):
More than 52.5 W at 100 mV
3
AF OUT
Output terminal for the AF signal.
Output level: 200 to 400 mVrms
when receiving Data mode
4
AF GND
Ground line for the AF signal.
—
5
GPS RXD
Input terminal for receive data from GPS
unit.
NMEA0183
6
NC
—
—
7
RELAY
Goes to ground when transmitting.
Less than 100 mV
8
EALC
ALC voltage input.
Control sensitivity (at –3 V input):
More than 40 dB suppression
9
MODPTT
PTT input terminal.
When grounded, transmits.
Input voltage: Less than 0.8 V
for transmit
10
CW KEY
CW and FSK keying input.
CW:
Less than 0.6 V
for transmit
RTTY: Open=Mark
11
EALARM
Output terminal for the Alarm signal.
Output current: 12 mA±10%
Open collector
12
GND
Connect to ground.
—
13
NC
—
—
14
NC
—
—
15
NC
—
—
1
5
11
6
15
10