Icom IC-F8101 Instruction Manual - Page 20
■ Functions for receive, Clarifier function, Preamp and Attenuator
![]() |
View all Icom IC-F8101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3 RECEIVE AND TRANSMIT ■■Functions for receive DDClarifier function The Clarifier function compensates for off-frequency stations. The function shifts the receive frequency up to ±200 Hz in 10 Hz steps, without shifting the transmit frequency. / qqPush [CLAR](7) to open the Clarifier adjustment window. wwPush [r] or [s] to adjust the frequency shift. • The transmit frequency is not shifted. eePush [CLAR](7) to save the setting, and return to the previous screen. • If desired, push [8] to cancel the setting and exit the window . When cancelling the Clarifier function, set the frequency shift to 0 Hz in the Clarifier adjustment window. Lower shift Upper shift DDPreamp and Attenuator The preamp amplifies received signals in the front end circuit to improve the S/N ratio and sensitivity. Turn ON this function to better receive weak signals. The attenuator prevents strong undesired signals near the desired frequency or near your location, such as from a broadcast station, from causing distortion or spurious signals. / qqPush [8] to enter the Main Menu screen. wwSelect the "Pre Amp" item of "Setmode." q Push [r] or [s] to select the item, and then push [4] to open the screen. (Setmode > Config) w Push [r] or [s] to select "Pre Amp," and then hold down [4] for 1 second. eePush [r] or [s] to select the desired option, ON, OFF or ATT ON. • If desired, hold down [Default](§§) for 1 second to return to the default setting. [Default] rrPush [4] to save the setting, and return to the previous screen. ttPush [8] one or more times to exit. 14
![](/manual_guide/products/icom-icf8101-instruction-manual-cd89302/20.png)