Icom IC-F8101 Instruction Manual - Page 17
RECEIVE AND TRANSMIT, ■ Basic voice transmit/receive - manual
![]() |
View all Icom IC-F8101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
3 RECEIVE AND TRANSMIT Quick Reference ■■Basic voice transmit/receive q First, check the following. ➥ The microphone and external speaker are connected. ➥ No "S," "L" or "V" mute icon appears. • If "S," "L" or "V" appears, push [MUTE](M) one or more times to turn OFF the mute. Mute icon r P ush [TUNE](9) to enter the antenna tune mode. • The "Auto Tune" screen appears. w P ush [r] or [s] to select the desired receive channel. • The S-meter shows the signal strength when a signal is received. e P ush [ +] or [ -] to adjust the desired audio level when receiving a signal. • If the bass or treble of the receive audio is too strong, push [CLAR](7) to set "Clarifier" to ON, and adjust to obtain clear audio. (See page 14 for the Clarifier function details.) • If the audio is distorted, select the suitable operating mode. (See page 9 for the Mode selection details.) NOTE: The antenna tune mode must be set to ON by the "Tuner" item of "Setmode." (Default: ON) (Main Menu > Setmode > Config) ttPush [4] to start auto tuning. • The display shows the antenna SWR. • If the antenna cannot be tuned after 20 seconds, the tuning circuit is automatically bypassed. • After tuning is finished, the auto tune automatically stops transmitting. • If necessary, push [8] to manually stop transmitting. • Push [Through](§§) to turn OFF the antenna tuner. yyAfter tuning is finished, push [TUNE](9) again to return to the normal operating screen. uuTo transmit on the channel, hold down [PTT] on the microphone, and speak at a normal voice level. • The RF meter shows the output power. iiRelease [PTT] to receive. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 11
![](/manual_guide/products/icom-icf8101-instruction-manual-cd89302/17.png)