Icom IC-F8101 Instruction Manual - Page 33
Stun call Only Open Selcall
View all Icom IC-F8101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
SELCALL/ALE OPERATION 4 DDStun call (Only Open Selcall) The Stun call disables the specified station from either transmitting and receiving. • Sending a Stun call qqHold down [ ] for 1 second to enter the Network selection screen. wwPush [r] or [s] to select the desired Network, and then push [ ]. • The Networks that belong to the Open Selcall system must be selected. eePush [r] or [s] to select the Call Type to "Stun." • "Selective," "Phone," "Message," "Send Position," "Get Position," "Get Status," "Emergency," "Channel Test" and "Stun" are selectable. The Get Status call is selectable in the Icom Selcall, and the Stun call is selectable in the Open Selcall. rrPush keypad to enter the Call ID, and then push [ ]. • The previously entered Call ID is displayed. • Push [t](§) or [u](§§§) to move the cursor. • Push [8] to delete the digit to the left of the cursor. • This Call ID is not stored in the Call ID list. ttPush keypad to enter the specified station's PIN Code, and then push [ ]. • Push [t](§) or [u](§§§) to move the cursor. • Push [8] to delete the digit to the left of the cursor. yyPush [r] or [s] to select the Profile, then push [ ]. uuPush [r] or [s] to select the Channel. • Only the channels that belong to the selected Network in step w, are displayed. • If desired, push [Tests](§§) to transmit the Channel Test call in this step. 1 2 3 iiPush [ ] to transmit the Stun call. The call is stored in the Call Out memory. • While calling, push [PTT] to cancel the call. 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Quick Reference 27