Icom IC-F8101 Instruction Manual - Page 79
Connect either the OPC-607, OPC-608, RMK-6, as shown below.
![]() |
View all Icom IC-F8101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
CONNECTION AND INSTALLATION 6 Quick Reference t Unscrew the 4 rear plate screws, then remove the rear plates from both the front panel and Main unit attachments. Rear plate *This illustration shows the description for the Main unit attachment. Main unit attachment y Connect either the OPC-607, OPC-608, OPC-609 or OPC-726 separation cable to the Main unit attachment, as shown below. After the connecting the cable, replace the rear plate and the 4 screws. • The separation cable can be inserted into either the left or right grooves on the back of the attachment. Use the supplied screw (M3 × 8 mm). Separation cable Cable groove Main unit attachment Rear plate u Connect the connection cable coming from the RMK-6, as shown below. Then tighten the 4 hex socket screws. i Connect the other end of the Separation cable to the front panel attachment, as shown below. After the cable connection, replace the removed rear plate and the 4 screws. • The separation cable can be inserted into either the left or right grooves on the back of the attachment. Use the supplied screw (M3 × 8 mm). Separation cable Cable groove Front panel attachment 1 Rear plate 2 3 4 o Connect the connection cable coming from the RMK-6, as shown below. Then tighten the 4 hex socket screws. 5 6 7 8 9 10 11 12 13 14 15 16 17 73
![](/manual_guide/products/icom-icf8101-instruction-manual-cd89302/79.png)