Icom ID-31A Instruction Manual - Page 13
■ Inserting the microSD card, ■ Format the microSD card - programming
View all Icom ID-31A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
2 ABOUT USING A MICROSD CARD ■■Inserting the microSD card qqTurn OFF the transceiver. wwLift OFF the [micro SD] slot cover on the side panel. eeWith the terminals facing the front, insert the card into the slot until it locks in place, and makes a 'click' sound. [micro SD] slot microSD card Terminals facing the front Slot cover r Firmly close the [micro SD] slot cover. BE CAREFUL! • DO NOT touch the terminals. • T o remove the card, push in to release it, then carefully pull the card out. • W hile reading or writing data from and to the card, NEV- ER remove the card. It will corrupt the data or damage the card. ■■Format the microSD card 1 When using a preformatted brand new microSD card, format- 2 ting is not necessary. However, we recommend you format it 3 in the following way to get card's best performance. 4 IMPORTANT! Formatting a card erases all its data. Before formatting any 5 programmed card, make a backup file onto your PC. 6 qqTurn ON the transceiver. 7 wwPush [MENU] to enter the 8 Menu screen. eePush D-pad(E) to select the root item 9 (SD Card), then push D-pad(Ent). 10 D-pad (Ent) 11 (�) 12 r P ush D-pad(E) to select "Format," 13 then push D-pad(Ent). • T he confirmation screen "Format OK?" 14 appears. t P ush D-pad(#) to select "YES," then 15 push D-pad(Ent) to format. 16 • T he formatting starts and the display shows the formatting state. 17 • After formatting, the display automatically returns to the SD CARD menu. 18 y Push [MENU] to return to the frequency display. Formatting state 19 4