Icom ID-31A Instruction Manual - Page 45
ft/ml - data jack
![]() |
View all Icom ID-31A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
6 MENU SCREEN OPERATION NOTE: The default settings, shown below, are for the USA version. 1 The default settings may differ, depending on the version. 2 GPS In this item, set the GPS options. 3 GPS Set GPS Select RANGE OR VALUE (Default is shown in bold) DESCRIPTIONS OFF, Internal GPS, Selects a GPS receiver that the trans- 4 External GPS or Manual ceiver receives its position data from. 5 Power Save (Internal GPS) OFF, 1min, 2min, 4min, 8min or Auto Selects the internal GPS receiver power 6 save function. Manual Position Manually enters your current position. 7 GPS Indicator OFF or ON Turns the GPS indicator ON or OFF. 8 Position Format ddd˚mm.mm' or ddd˚mm'ss" Selects position format to display the po- 9 sition. 10 Altitude/Distance Units m or ft/ml Speed Units Alarm Area1 km/h, mph or knots 0'05"/0.08'~0'15"/0.25'~ 59'59"/59.99' Selects units to display the distance and 11 elevation. Selects units to display the speed. 12 13 Enters the GPS alarm active range. 14 Alarm Area2 Limited, Extended or Both Selects the GPS alarm active range. 15 GPS Out OFF or ON Selects the GPS information from the in- 16 ternal GPS receiver that is output to the 17 [DATA] jack. 18 19 ☞ Continues on the next page. 36
![](/manual_guide/products/icom-id31a-instruction-manual-5be5acc/45.png)