Icom ID-31A Instruction Manual - Page 42

■ Menu items and default settings

Get Icom ID-31A PDF manuals and user guides View all Icom ID-31A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

6 MENU SCREEN OPERATION ■■Menu items and default settings NOTE: The default settings, shown below, are for the USA version. The default settings may differ, depending on the version. DUP/TONE... In this item, set the repeater options, for example duplex offset or the channel tone types. Offset Freq RANGE OR VALUE (Default is shown in bold) 0.000~5.000.00~59.995 DESCRIPTIONS Sets the frequency offset for duplex (repeater) operation. Repeater Tone 67.0~88.5~254.1 Selects the tone frequency used to access the repeaters. TSQL Freq Tone Burst DTCS Code DTCS Polarity 67.0~88.5~254.1 OFF or ON 023~754 Both N, TN-RR, TR-RN or Both R Selects the tone frequency for the Tone squelch or the pocket beep function. Turns the Tone Burst function ON or OFF. When this setting is ON and you transmit a signal which superimposes the CTCSS tone or subaudible tone, the squelch tail noise of FM mode is suppressed on the RX side. Selects DTCS (both encoder/decoder) code for DTCS squelch or the pocket beep function. Selects the DTCS polarity for the DTCS squelch or the pocket beep function. Digital Code 00~99 33 Selects the digital code for the Digital Code squelch function.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
33
6
MENU SCREEN OPERATION
DUP/TONE...
Offset Freq
Repeater Tone
TSQL Freq
Tone Burst
DTCS Code
DTCS Polarity
Digital Code
0.000~
5.000.00
~59.995
In this item, set the repeater options, for example duplex offset or the channel tone types.
67.0~
88.5
~254.1
67.0~
88.5
~254.1
RANGE OR VALUE (Default is shown in bold)
OFF
or ON
023
~754
Both N
, TN-RR, TR-RN or Both R
00
~99
DESCRIPTIONS
NOTE:
The default settings, shown below, are for the USA version.
The default settings may differ, depending on the version.
■
Menu items and default settings
Sets the frequency offset for duplex (re-
peater) operation.
Selects the tone frequency used to ac-
cess the repeaters.
Selects the DTCS polarity for the DTCS
squelch or the pocket beep function.
Selects the digital code for the Digital
Code squelch function.
Selects the tone frequency for the Tone
squelch or the pocket beep function.
Turns the Tone Burst function ON or
OFF. When this setting is ON and you
transmit a signal which superimposes
the CTCSS tone or subaudible tone, the
squelch tail noise of FM mode is sup-
pressed on the RX side.
Selects DTCS (both encoder/decoder)
code for DTCS squelch or the pocket
beep function.