Icom ID-31A Instruction Manual - Page 59
Resetting
View all Icom ID-31A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
7 RESETTING ■■Resetting 1 The display may occasionally display DDPartial reset DDAll reset 2 erroneous information (e.g. when first q H old down for 1 second to turn q H old down for 1 second to turn 3 applying power). This may be caused externally by static electricity or by oth- OFF power. w While holding down [V/MHz] OFF power. , w While holding down [V/MHz] , 4 er factors. then hold down for 1 second to [M/CALL] and D-pad(Ent), then 5 If this problem occurs, turn OFF power. After waiting a few seconds, turn ON power again. If the problem persists, perform either or both procedures be- turn ON power to partially reset the transceiver. • "PARTIAL RESET" appears when par- tially resetting the CPU. hold down for 1 second to turn ON power to reset the CPU. 6 • "ALL RESET" appears when resetting 7 the CPU. 8 low. 9 • Partial reset Use Partial reset if you want to initial- 10 ize the operating conditions (VFO fre- 11 quency, VFO settings, menu contents) without clearing the memory contents, 12 call sign memories or repeater lists. 13 14 • All reset 15 Reset the CPU, if the internal CPU mal- functions due to static electricity, etc. All 16 reset clears all programming and returns all settings to their defaults. 17 18 19 50