Icom ID-31A Instruction Manual - Page 27
■ External DC power operation, Operating note
View all Icom ID-31A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
BATTERY CHARGING 4 ■■External DC power operation An optional CP-12L or CP-19R cigarette lighter cable, for a 12 V cigarette lighter socket, or an OPC-254L external DC power cable can be used for external power. DDOperating note • T he power supply voltage must be between 10.0-16.0 V DC. NEVER CONNECT OVER 16 V DC directly into the [DC IN] jack of the transceiver. • BE SURE to use a CP-12L, CP-19R or OPC-254L when connecting a regulated 12 V DC power supply. Use an external DC-DC converter to connect the transceiver through an optional CP-12L, CP-19R or OPC-254L to a 24 V DC power source. • T he voltage of the external power supply must be between 10-16 V DC when using either CP-12L, CP-19R or OPC254L, otherwise, use the battery pack. • Disconnect the power cables from the transceiver when not using it. Otherwise, the vehicle battery will become exhausted. • T he power save function is automatically deactivated when using an external DC power source. 1 Transceiver • CP-12L (Optional) 2 3 4 5 to a cigarette lighter socket (12 V DC) 6 • CP-19R (Optional) to 7 [DC IN] 8 9 BP-271 10 • OPC-254L (Optional) 11 to a 12 V DC (power supply) 12 Black: _ 13 14 White: + 15 16 NOTE: Up to 5 W (approximately) of maximum output power is possible when using external DC power. However, 17 when the supply voltage exceeds 14 V, the built-in protec- 18 tion circuit activates to reduce the transmit output power to approximately 2.5 W. 19 18