Insignia NS-BK2TBK8 User Guide - Page 10
Assembling your kegerator, Installing the casters (optional
View all Insignia NS-BK2TBK8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
NS-BK2TBS8/NS-BK2TBK8 Notes • The kegerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. • We strongly recommend that you do not use an extension cord. However, if you must use an extension cord, it is absolutely essential that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes. • Never unplug your kegerator by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet. Assembling your kegerator Installing the casters (optional) 1 Remove all contents from the kegerator, then tip it onto its side on a soft surface to protect it from scratches. 2 Unscrew and remove the black front feet. Keep them in a safe place in case you want to use the feet later. 3 Attach the two metal washers (included) to the locking casters to prevent scratching the cabinet, then install the two locking casters in the front positions on the bottom of the kegerator (closest to the door). 4 Install the other two casters in the rear positions on the bottom of the kegerator. Front Metal washers Locking casters Casters 5 With all four casters tightened evenly, stand the unit in the upright position. 6 Step on the front of the locking casters to lock the kegerator into place or step on the back to unlock the kegerator. 10 www.insigniaproducts.com