Insignia NS-BK2TBK8 User Guide - Page 15

Dual Beer Kegerator/Beverage Cooler 4 Pull the black handle on the sankey keg coupler and press it downward until it locks into position. The keg is now tapped. Sankey keg coupler Note If beer comes up through the top of the wing nut, remove the wing nut, reposition the washer, then reattach the wingnut. 5 Insert the keg(s) into the kegerator. Adjusting the CO2 regulator 1 Make sure that the shut-off valve is closed (sideways if closed, down if open), then slowly turn the main valve on the CO2 tank counter-clockwise until it is fully open. Shut-off valve 2 Open the shut-off valve to allow gas to flow into the keg. Closed Open 3 Release the adjustment lock nut, behind the regulator screw, by turning it clockwise about 5-7 turns. www.insigniaproducts.com 15