Insignia NS-BK2TBK8 User Guide - Page 14
Installing and setting up a beer keg, Installing the keg coupler, BARREL, GALLONS, GLASSES, HOW MANY
View all Insignia NS-BK2TBK8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
NS-BK2TBS8/NS-BK2TBK8 Installing and setting up a beer keg This kegerator accepts almost all brand name kegs. Here's what will fit in your kegerator: BARREL SIZE (short, pony) (slim) HOW MANY WILL FIT GALLONS 12 oz GLASSES *You can have a 1/4 (slim) and a 1/6, or a 1/4 (slim) and an 1/8 in your kegerator at the same time. Installing the keg coupler 1 Insert the sankey keg coupler into the neck of the beer keg and turn it clockwise to lock it into position. Make sure that the washer is in the connector on the top of the sankey keg coupler. Sankey keg coupler 2 Insert the beer tube into the top of the sankey keg coupler, then tighten the wing nut. Beer tube Wing nut Sankey keg coupler 3 Repeat steps 1-2 if you have a second keg. 14 www.insigniaproducts.com