Insignia NS-BK2TBK8 User Guide - Page 24

Specifications

Page 24 highlights

NS-BK2TBS8/NS-BK2TBK8 Problem Possible cause Possible solution The cooler turns on and The room temperature is off frequently. hotter than normal. Make sure that the door was properly installed. The door has been opened too Make sure that the door is closed properly. often or was not closed properly. The door gaskets do not seal Clean the door gaskets. properly. The temperature control is set Set the control to a colder setting. too warm. The kegerator makes unusual noises or vibrates. The kegerator may not be level Level the kegerator with the leveling feet. on the floor. The body of the kegerator is Move the kegerator out from the wall. touching a wall. • A rattling noise may be heard. This is caused by the flow of refrigerent in the kegerator. • As each cooling cycle ends, you may hear gurgling sounds. • Contraction and expansion of the inside walls may cause popping or crackling noises. This is normal. Moisture is building up The door has been opened too Make sure that the door is closed properly. in the interior of the often or was not closed cooler. properly. The cooler is in a location that Move the cooler to a dryer location. is very humid. The bottles in the cooler are Rearrange the bottles in the cooler to make sure that they are not packaged properly. sealed. Specifications Dimensions (HxWxD) Weight Power requirements Current Power consumption (annual) 33.7 x 23.6 x 23.6 in. (85.5 x 60.0 x 60.0 cm) 102.5 lbs. (46.5 kg) 115V~60Hz 0.86 A 310 kwh 24 www.insigniaproducts.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

24
NS-BK2TBS8/NS-BK2TBK8
www.insigniaproducts.com
Specifications
The cooler turns on and
off frequently.
The room temperature is
hotter than normal.
Make sure that the door was properly installed.
The door has been opened too
often or was not closed
properly.
Make sure that the door is closed properly.
The door gaskets do not seal
properly.
Clean the door gaskets.
The temperature control is set
too warm.
Set the control to a colder setting.
The kegerator makes
unusual noises or
vibrates.
The kegerator may not be level
on the floor.
Level the kegerator with the leveling feet.
The body of the kegerator is
touching a wall.
Move the kegerator out from the wall.
A rattling noise may be
heard. This is caused by the
flow of refrigerent in the
kegerator.
As each cooling cycle ends,
you may hear gurgling
sounds.
Contraction and expansion
of the inside walls may
cause popping or crackling
noises.
This is normal.
Moisture is building up
in the interior of the
cooler.
The door has been opened too
often or was not closed
properly.
Make sure that the door is closed properly.
The cooler is in a location that
is very humid.
Move the cooler to a dryer location.
The bottles in the cooler are
not packaged properly.
Rearrange the bottles in the cooler to make sure that they are
sealed.
Dimensions (HxWxD)
33.7 x 23.6 x 23.6 in. (85.5 x 60.0 x 60.0 cm)
Weight
102.5 lbs. (46.5 kg)
Power requirements
115V~60Hz
Current
0.86 A
Power consumption (annual)
310 kwh
Problem
Possible cause
Possible solution