Insignia NS-FTV27 User Manual (English) - Page 11

NS-FTV27 27-inch Flat Stereo Color TV 5 Press or to select ADDING CHANNEL, then press or . 6 Press EXIT to return to the normal screen. 7 Repeat step 1-6 for other digital channels you want to add. Using clear all All channels can be deleted from the channel memory. To clear all channels from memory: 1 Press MENU. The menu screen appears. 2 Press or to select the SETUP menu, then press or to select ADD/DELETE. 3 Press or . The ADD/DELETE menu appears. 4 Press or to select CLEAR ALL, then press or . Using your television Notes • If you select a channel with no broadcast signal, the sound is automatically muted. • If a station you are viewing stops broadcasting, the television automatically shuts itself off after 15 minutes. To use the television: 1 Press POWER to turn on the television. 2 Adjust the volume level by pressing VOL + or -. The volume level is indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases. 3 Set the TV/CABLE menu option to the appropriate position (see "Selecting TV or cable" on page 9). 4 Press the direct channel selection buttons to select the channel. Selecting analog channels Channels Press 1-9 Press 0 twice, then 1-9 as needed. Example: to select channel 2, press 0 0 2. 10-99 Press 0, then the remaining 2 digits. Example, to select channel 12, press 0 1 2. 100-125 Press the 3 digits in order. Example, to select channel 120, press 1 2 0. Selecting digital channels Press the first 3 digits, then press the -/DISPLAY button, followed by the remaining 3 digits. Example, to select channel 015-001, press 0 1 5 - 0 0 1. Note the following: • If a channel is selected with only audio content, "AUDIO ONLY" will be displayed on the screen. • If a channel is selected with a weak digital signal, "DIGITAL CHANNEL SIGNAL STRENGTH IS LOW" will be displayed on the screen. • If a channel is selected to which you have not subscribed, "DIGITAL CHANNEL IS SCRAMBLED" will be displayed on the screen. TV Cable VHF 2-13 VHF 2-13 UHF 14-69 STD/HRC/IRC 14-36 (A) (W) 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) 86-94 (86) (94) 95-99 (A-5) (A-1) 100-125 (100) (125) 01 (5A) Seeking channels To seek the next channel: Press and release CH or . The channel automatically stops at the next channel set into memory. For proper operation, before seeking channels, they should be set into the memory. See "Memorizing channels" on page 9. Viewing information Note The screen automatically returns to normal TV operation after 10 seconds. To view program information: 1 Press -/DISPLAY to display the current information on the screen. When the television receives a digital signal, the digital information appears: • Broadcast program name • Station name • Remaining time • Audio language • Program name • V-Chip rating • V-Chip mark • Closed caption mark When the television receives an analog signal, -/DISPLAY shows only analog information. 2 Press -/DISPLAY again. The analog information appears. • Clock • Channel number or video mode selected • Channel label (if preset) • Stereo or SAP (second audio program) audio status • Content rating • On timer, Off timer, Sleep time (if preset) • Picture size 3 Press -/DISPLAY again to clear the call display. 10 www.insignia-products.com