Insignia NS-FTV27 User Manual (English) - Page 18

NS-FTV27 27-inch Flat Stereo Color TV Specifications Design and specifications are subject to change without notice. Power supply AC 120V, 60 Hz Power Consumption Operation Standby 110 Watts 3 Watts Chassis Construction Weight Width Height Depth 88.2 lbs. (40.0 kg) 29-1/8 inches (740 mm) 22-5/8 inches (575 mm) 19-7/16 inches (494.5 mm) Inputs VIDEO AUDIO S-VIDEO COMPONENT 1 V (p-p)/75 ohms -8 dBm/50k ohms Y: 1 V (p-p), 75 ohms C: 0.286 V (p-p), 75 ohms Y: 1 V (p-p), 75 ohms PR: 0.7 V (p-p), 75 ohms PB: 0.7 V (p-p), 75 ohms Output DIGITAL AUDIO 0.5 V (p-p), 75 ohms Other Antenna input VHF/UHF/CABLE In 75 ohm coaxial Picture tube 27 inches (676.0 mm diagonal) Tuner type Quartz PLL frequency synthesized Receiving channels VHF 2-13 UHF 14-69 CABLE TV 14-36 (A)-(W) 37-59 (AA)-(WW) 60-85 (AAA)-(ZZZ) 86-94 (86)-(94) 95-99 (A-5)-(A-1) 100-125 (100)-(125) 01 (5A) Speakers 1-13/16 inches (45.7 mm) x 3-7/8 inches (99.1 mm), 8 ohm x 2 Sound output power 1.0 W + 1.0 W Troubleshooting Use the following checklist for troubleshooting when you have problems with your television. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. Problem Solution Television does not operate. Poor sound or no sound. Poor picture or no picture. Poor reception on some channels. Poor color or no color. Picture wobbles or drifts. Digital broadcasting screen problem. No CATV reception. Horizontal or diagonal bars on screen. • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off. Check fuse or circuit breaker. • Unplug television for an hour, then plug it back in. • Station or cable experiencing problems. Tune to another station. • Check sound adjustments (volume and mute). • Check for sources of possible interference. • Station or cable experiencing problems. Tune to another station. • Make sure channels are set into memory. • Check antenna or cable connections. Adjust the antenna. • Check for sources of possible interference. • Check picture control adjustments. • Station or cable experiencing problems. Tune to another station. • Make sure channels are set into memory. • Station is weak. Adjust the antenna to receive the desired station. • Check for sources of possible interference. • Station or cable experiencing problems. Tune to another station. • Make sure channels are set into memory. • Check picture control adjustments. • Check antenna or cable connections. Adjust the antenna. • Check for sources of possible interference. • Station or cable experiencing problems. Tune to another station. • Make sure channels are set into memory. • Cable company is scrambling signal. • Adjust antenna. • Check digital signal strength. • Check all cable connections. • Set TV/CABLE menu option to the CABLE mode. • Station or cable system problems. Try another station. • Check antenna connections. • Adjust or re-direct antenna. • Check for sources of possible interference. www.insignia-products.com 17