Insignia NS-PDP50HD-09 User Manual (English) - Page 15
Using your TV - no power
View all Insignia NS-PDP50HD-09 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Insignia NS-PDP50HD-09 50" PDP TV The screen resolution of your TV is optimized during for the display modes listed below. If the signal from the PC is a standard resolution, the screen is adjusted automatically. If the signal from the system is not standard, adjust the screen resolution by referring to your video card user guide, otherwise there may be no picture. Vertical Resolution frequency (Hz) Horizontal frequency (kHz) 640 × 400 85 37.9 720 × 400 85 37.9 640 × 480 60 31.5 72 37.9 75 37.5 85 43.3 800 × 600 56 35.1 60 37.9 72 48.1 75 46.9 85 53.7 1024 × 768 60 48.4 70 56.5 75 60.0 85 68.7 1152 × 864 75 67.5 1280 × 960 60 60.0 1280 × 1024 60 64.0 1366 × 768 60 47.7 Connecting an audio receiver or Dolby Digital 5.1 sound system You can connect your TV's audio to a digital amplifier or home theater system. Back of TV To connect to an audio receiver or Dolby Digital 5.1 sound system: 1 Plug RCA audio cables into the OUTPUT AUDIO L (white) and AUDIO R (red) jacks on the back of your TV, then into the AUDIO L (white) and AUDIO R (red) input jacks on the audio receiver. - OR Plug an optical cable into the DIGITAL AUDIO OUTPUT jack on the back of your TV, then into to optical input jack on your Dolby Digital 5.1 sound system. 2 Press to turn on your TV. Arranging the cables After connecting the cables, bundle the cables using the cable guide as shown. Cable guide Using the swivel base The viewing angle of your TV may be adjusted approximately 60° to the left or right as shown. Audio cable Optical cable Audio amplifier or receiver Using your TV Turning the TV on and off To turn your TV on and off: 1 Press (power) on the TV or remote control. The POWER/STANDBY indicator turns blue and your TV turns on. www.insignia-products.com 15