Insignia NS-TDRG75W1 User Guide - Page 14
Installing in an alcove, closet, or wall insert/recessed, Either side, Front, WARNING
View all Insignia NS-TDRG75W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
INSTALLATION INSTRUCTIONS Installing in an alcove, closet, or wall insert/recessed WARNING: • You must exhaust your dryer to the outside to reduce the risk of fire when installed any place inside the house. • Do NOT install another fuel-burning appliance in the same closet as your dryer. • For information about how to select and install exhaust ducts, see Exhausting requirements on page 15. If you install your dryer in an alcove, closet, or wall insert/recessed, the front of the closet must have two unobstructed air openings for a combined minimum total area of 72 sq.in. (465 sq. cm) with a minimum clearance of 3 in. (7.6 cm) at the top and bottom. A slatted door with equivalent space clearance is acceptable. Minimum clearances between your dryer and adjacent walls or other surfaces are: • Either side: 1 in. (2.5 cm) • Rear: 5 in. (12.7 cm) • Top: 24 in. (61 cm) • Front: 2 in. (5.1 cm) 48 in.² 310 cm² 3 in. 7.6 cm 24 in.² 155 cm² 14 3 in. 7.6 cm www.insigniaproducts.com