Insignia NS-TDRG75W1 User Guide - Page 31
Step 5: Move the hinge plates, dryer to secure.
![]() |
View all Insignia NS-TDRG75W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
INSTALLATION INSTRUCTIONS 10-Cycle Electric and Gas Dryers Step 5: Move the hinge plates 1 On the main body of your dryer, use a putty knife to remove the two hinge plates. Note: If you don't have a putty knife, you can use a flathead screwdriver. Be careful: a screwdriver may scratch your dryer. Consider wrapping your screwdriver with a thin cloth. 2 Align the two hinge plates on the opposite side, then press them onto the dryer to secure. www.insigniaproducts.com 31
![](/manual_guide/products/insignia-nstdrg75w1-user-guide-adb2dca/31.png)
31
www.insigniaproducts.com
10-Cycle Electric and Gas Dryers
INSTALLATION INSTRUCTIONS
Step 5: Move the hinge plates
1
On the main body of your dryer, use a putty knife to remove the two hinge
plates.
2
Align the two hinge plates on the opposite side, then press them onto the
dryer to secure.
Note
: If you don’t have a putty knife, you can use a flathead screwdriver. Be
careful: a screwdriver may scratch your dryer. Consider wrapping your
screwdriver with a thin cloth.