Insignia NS-TDRG75W1 User Guide - Page 36
Cleaning the lint filter, Dryer options and settings, Small load, Medium load, Large load, WARNING
View all Insignia NS-TDRG75W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
OPERATING INSTRUCTIONS Cleaning the lint filter WARNING: Do not operate your dryer without the lint filter in place. Note: • You should clean the lint filter after every load to shorten the drying time and to make sure that your dryer is running efficiently. • If the lint is difficult to wipe away, you can gently wash the filter in mild, soapy water. Make sure that you rinse all the soap off the filter and that the filter is dry before you put it back into your dryer. • Gently pull the lint filter out of the slot at the bottom of the drum. Remove the accumulated lint, then insert the filter back into the slot. Lint filter Lint filter Dryer options and settings • • Settings in bold are initial settings. The (dot) indicates optional functions you can select. • For best results, follow the wet load size recommendations noted for each cycle. • Small load: Fill the dryer drum with three to four items, not more than 1/4 full. • Medium load: Fill the dryer drum up to about 1/2 full. • Large load: Fill the dryer drum up to about 3/4 full. Do not overload. Items need to tumble freely. CYCLE FABRIC TYPE TEMP DRYNESS WRINKLE PREVENT MY CYCLE TIME ADJUST DEFAULT TIME MAX AMOUNT Very • Cotton Normal • Underwear • Linen High More Normal Less • • Damp Very • Sensitive Delicates items More Low Normal • • Less Damp 63 min. 23 min. 36 www.insigniaproducts.com