Insignia NS-TWM41WH8A User Manual - Page 14
Electrical requirements
![]() |
View all Insignia NS-TWM41WH8A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
INSTALLATION INSTRUCTIONS Installing in an alcove or closet Minimum clearances between your washer and adjacent walls or other surfaces are: • Either side: 1 in. (2.5 cm) • Rear: 6 in. (15.2 cm) • Closet Front: 2 in. (5.1 cm) • Top: 24 in. (61 cm) • Gap between the end of water valve and the wall: • Case 1: If you connect the supply hose after you install your washer: Over 3.9 in. (10 cm) • Case 2: If you connect the supply hose before you install your washer: Over 2.8 in. (7 cm) If you install your washer and dryer side-by-side in a closet, the closet front must have an unobstructed air opening of at least 72 square inches (465 square cm). 24 in. 61 cm 1 in. 2.5 cm 27 in. (68.6 cm) 1 in. 2.5 cm 2 in. 5.1 cm 29 in. (73.5 cm) 6 in. (15.2 cm) Electrical requirements Warning To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Use a 120 Volt, 60Hz, 15 amp fuse or circuit breaker. We recommend an individual branch circuit that serves only your washer. Warning Never use an extension cord. Electrical grounding is required for your washer. You must ground your washer. In the event of a malfunction or breakdown, grounding reduces the risk of electric shock by providing a path of least resistance for the electric current. Your washer is equipped with a power cord with a three-pronged grounding plug for use in a correctly installed and grounded outlet. 14 www.insigniaproducts.com
![](/manual_guide/products/insignia-nstwm41wh8a-user-manual-128573e/14.png)