Insignia NS-TWM41WH8A User Manual - Page 25
Delay, Start Pause, The Delay Start Time cannot be changed after the program has, started., Power,
View all Insignia NS-TWM41WH8A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
OPERATING INSTRUCTIONS 4.1 Cu. Ft. Top-Load Washer Step 5: (Optional) Set a delayed start time You can program a wash cycle, then set a time when you want a wash cycle to begin. 1 Press the Delay button to turn on the delay start time function. 2 Press the Delay button repeatedly to select the delay time you want. The delay start time, in hours, will be shown on the display, in sequence, from 0 to 24, then back to 0. You can also press and hold the Delay button to quickly adjust the time until the desired time appears on the display. 3 If you want to change the wash cycle settings while you are setting the delay start time, turn the cycle selector. To return to setting the delay start time function, repeat Steps 1 and 2. Notes • Once the number of delay hours is reached by pushing the Delay button, release the button for three seconds and it will be set. The Delay light will remain on. • After the delay time is set, if you wish to change the delay setting, press the Delay button again until the desired hour is reached. Release the button for three seconds and it will be set. • If you decide to cancel the delay setting, you can either turn the cycle selector or push the Delay button until 0 is reached. • Ideally, you should set your cycle before setting the Delay, because turning the cycle selector after the Delay is set cancels the delay. • The Delay Start Time cannot be changed after the program has started. 4 To cancel the delay start time function before you save the setting, press the Delay button until 0 appears on the display, or turn the cycle selector knob. Important You can change settings or cancel the delay start time function anytime before you press the /Start Pause button by turning the cycle selector. The delay start time cannot be changed after you press the /Start Pause button. If you pressed the /Start Pause button, you can cancel the delay start time function by pressing the /Power button to turn off your washer, then pressing the /Power button again to turn it back on. Step 6: Start your washer 1 Press the /Start Pause button. Note If you have not set a delayed start time or if the delay time has expired, your washer starts the cycle and the Wash light turns on. As your washer moves from stage to stage in the wash cycle, the related light turns on (such as Rinse or Spin). If you set a delayed start time, the Delay light turns on and your washer starts counting down the start time. www.insigniaproducts.com 25