Insignia NS-TWM41WH8A User Manual - Page 9

INSTALLATION INSTRUCTIONS Control panel 4.1 Cu. Ft. Top-Load Washer # ITEM 1 /Power button 2 Cycle selector DESCRIPTION Press to turn on your washer. Press again to turn off your washer. If you leave your washer on and do not press the /Start Pause button within 10 minutes, your washer automatically turns off. Turn to select a wash cycle. The cycle you select determines the wash pattern for the cycle. For more information, see Washer options and settings on page 26. 3 Digital display 4 Soak button • The initial display is the total time for the cycle you select. • While your washer is running, the display shows the cycle process and time remaining in the cycle. Note: The time shown is an estimate based on normal operating conditions. External factors (such as the load size, room temperature, incoming water temperature, and water pressure) can affect actual time. • If you set a delay time for the start of the cycle, the display shows the time when the cycle will start. Press to select the Soak option. Press again to cancel. Select this option for heavily soiled items that need to soak to remove stains and heavy dirt. Soak occurs after the tub fills and detergent is added, but before the wash process. The agitator will rotate several times during the soak process. 5 Extra Rinse button 6 /Start Pause button 7 Cycle status lights 8 Delay button 9 Soil Level button 10 Child lock 11 Temp button 12 Water Plus button 13 Fabric Softener button Press to add an extra rinse to the wash cycle. Press again to cancel. Press once to start the wash cycle. Press again to pause the cycle. If you pause the cycle, you can add or remove items, but you cannot change any settings. Press again to restart the cycle. Light to indicate what part of the cycle your washer is in. For example, the Soak light turns on when your washer is in the Soak process. Press to select a time when you want the cycle to begin. You can set the time up to 24 hours in advance in one-hour increments. The display shows the time when the cycle will start. For more information, see Step 5: (Optional) Set a delayed start time on page 25. Press to select the soil level. Different soil levels result in different washing times and wash cycle settings. For more information, see Washer options and settings on page 26. Press and hold the Soil Level and Temp buttons at the same time for three seconds to turn on the child lock function. Press and hold these buttons again for three seconds to turn off the function. When the child lock function is turned on, the only button that works is the /POWER button and the Soil Level and Temp buttons you use to turn off the child lock. Press to select the washing water temperature. The rinse water temperature is always cold. Press once to increase one higher water level. Press again to cancel this function. If the water level is already set to the highest, the level will not change. Add liquid fabric softener to the fabric softener compartment, then press this button. The fabric softener is added to the cycle at the correct time. www.insigniaproducts.com 9