Insignia NS-TWM41WH8A User Manual - Page 20
Over the edge of a wash basin, In a standpipe
 |
View all Insignia NS-TWM41WH8A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
INSTALLATION INSTRUCTIONS 4 Fasten the drain hose to the washer frame with the hose clamps (2) provided, using a Phillips screwdriver. 5 Position the other end of the drain hose (the loose end) in one of the following ways: Caution Make sure that the connection between the drain hose and the wash basin, standpipe, or laundry tub is not airtight. • Over the edge of a wash basin - Secure the guide to the side of the basin wall with a hook, tape it, or tie it with a piece of cord to prevent the drain hose from moving. • In a standpipe - The standpipe must be no shorter than 39-in. (99 cm) and no longer than 96-in. (244 cm). Hose retainer Tie strap 96-in. max 39-in. min 20 www.insigniaproducts.com
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23 -
24 -
25 -
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
20
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
4
Fasten the drain hose to the washer frame with the hose clamps (2) provided, using a Phillips screwdriver.
5
Position the other end of the drain hose (the loose end) in one of the following ways:
•
Over the edge of a wash basin
- Secure the guide to the side of the basin wall with a hook, tape it, or tie it
with a piece of cord to prevent the drain hose from moving.
•
In a standpipe
- The standpipe must be no shorter than 39-in. (99 cm) and no longer than 96-in. (244 cm).
Caution
Make sure that the connection between the drain hose and the wash basin,
standpipe, or laundry tub is not airtight.
96-in. max
39-in. min
Hose
retainer
Tie strap