Intel D2550DC2 Product guide for Intel Desktop Board D2550DC2 - Page 32

Installing an Intel® Z-U130 USB Solid-State Drive or Compatible Device,

Get Intel D2550DC2 PDF manuals and user guides View all Intel D2550DC2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Intel Desktop Board D2550DC2 Product Guide Installing an Intel® Z-U130 USB Solid-State Drive or Compatible Device An Intel Z-U130 USB Solid-State Drive or compatible device can be installed on the Desktop Board by using the onboard USB 2.0 header shown in Figure 1, S. This header provides support for the solid-state drive. To install an Intel Z-U130 USB Solid-State Drive or compatible device on the Desktop Board, follow these steps: 1. Observe the precautions in "Before You Begin" on page 23. 2. Align the connector (Figure 10, A) on the bottom of the solid state drive with the USB 2.0 header on the Desktop Board. The connectors are keyed and will mate correctly when the solid state drive is oriented as shown in Figure 10. 3. Secure the solid state drive to the Desktop Board with the provided screw (Figure 10, B). Figure 10. Installing an Intel Z-U130 USB Solid-State Drive (or Compatible Device) 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Intel Desktop Board D2550DC2 Product Guide
32
Installing an Intel
®
Z-U130 USB Solid-State
Drive or Compatible Device
An Intel Z-U130 USB Solid-State Drive or compatible device can be installed on the
Desktop Board by using the onboard USB 2.0 header shown in Figure 1, S.
This
header provides support for the solid-state drive.
To install an Intel Z-U130 USB Solid-State Drive or compatible device on the Desktop
Board, follow these steps:
1.
Observe the precautions in "Before You Begin" on page 23.
2.
Align the connector (Figure 10, A) on the bottom of the solid state drive with the
USB 2.0 header on the Desktop Board.
The connectors are keyed and will mate
correctly when the solid state drive is oriented as shown in Figure 10.
3.
Secure the solid state drive to the Desktop Board with the provided screw
(Figure 10, B).
Figure 10.
Installing an Intel Z-U130 USB Solid-State Drive
(or Compatible Device)