Intel D2550DC2 Product guide for Intel Desktop Board D2550DC2 - Page 9
Desktop Board Features - atom
View all Intel D2550DC2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
1 Desktop Board Features This chapter briefly describes the main features of Intel® Desktop Board D2550DC2. Table 1 summarizes the features of the Desktop Board. Table 1. Feature Summary Form Factor Processor Main Memory Chipset Integrated Graphics External Graphics Audio Expansion Capabilities Peripheral Interfaces Hardware Monitor Subsystem Mini-ITX (170 millimeters [6.7 inches] x 170 millimeters [6.7 inches]) Passively-cooled, soldered-down dual-core Intel® Atom™ processor with integrated graphics and memory controller. • Two 204-pin Double Data Rate 3 (DDR3) Small Outline Dual Inline Memory Module (SO-DIMM) sockets with gold-plated contacts • Support for DDR3 1066/1333/1600 MHz SO-DIMMs (DDR3 1333 MHz and DDR3 1600 MHz SO-DIMMs operate at 1066 MHz only) • Support for up to 4 GB of system memory Intel® NM10 Express Chipset Intel® Graphics Media Accelerator 3650 (Intel® GMA 3650) integrated graphics subsystem with support for digital video (DVI) and High Definition Multimedia Interface* (HDMI*) External graphics support provided through the PCI bus connector RealTek* ALC662 audio codec for 5.1 (6-channel) Intel® High Definition Audio (Intel® HD Audio) and AC '97 Audio. Included are: • Back panel audio connectors • Back panel S/PDIF digital audio connector (optical) • Front panel microphone/headphone header with support for Intel HD Audio or AC '97 Audio One PCI* bus add-in card connector One PCI Express* Full-Mini Card slot with Half-Mini Card support • Seven USB 2.0 ports: ― Four back panel ports ― Three front panel ports (via two internal headers; one header supports an Intel® Z-U130 USB Solid-State Drive or compatible device • Two Serial ATA (SATA) 3.0 Gb/s connectors Hardware monitoring through the Winbond* W83627DH-P legacy I/O controller, including: • Remote thermal sensor • One 3-pin system fan header with speed control continued 9