Intel D845GLLY D845GLLY_ProductSupplement - Page 27
Standby Current Requirements
![]() |
View all Intel D845GLLY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Product-Specific Features 2.6.3 Standby Current Requirements CAUTION If the standby current necessary to support multiple wake events from the PCI and/or USB buses exceeds power supply capacity, the Desktop Board D845GLLY may lose register settings stored in memory, etc. Calculate the standby current requirements using the steps described below. Power supplies used with the Desktop Board D845GLLY must be able to provide enough standby current to support the Instantly Available PC (ACPI S3 sleep state) configuration as outlined in Table 20 below. Values are determined by specifications such as PCI 2.2. Actual measured values may vary. To estimate the amount of standby current required for a particular system configuration, standby current requirements of all installed components must be added to determine the total standby current requirement. Refer to the descriptions in Table 20 and review the following steps. 1. Note the total D845GLLY standby current requirement. 2. Add to that the total PS/2 port standby current requirement if a wake-enabled device is connected. 3. Add, from the PCI 2.2 slots (wake enabled) row, the total number of wake-enabled devices installed and multiply by the standby current requirement. 4. Add, from the PCI 2.2 slots (nonwake enabled) row, the total number of wake-enabled devices installed and multiply by the standby current requirement. 5. Add all additional wake-enabled devices' and nonwake-enabled devices' standby current requirements as applicable. 6. Add all the required current totals from steps 1 through 5 to determine the total estimated standby current power supply requirement. Table 20. Standby Current Requirements Instantly Available PC Current Support (Estimated for Integrated Board Components) Instantly Available PC Stand-by Current Support • Estimated for add-on components • Add to Instantly Available PC total current requirement Description Total for Desktop Board D845GLLY PS/2 ports (Note) PCI 2.2 slots (wake enabled) PCI 2.2 slots (nonwake enabled) USB ports (Note) (See instructions above) Note: Dependent upon system configuration Standby Current Requirements (mA) 486 345 375 20 500 27
![](/manual_guide/products/intel-d845glly-d845gllyproductsupplement-eff3477/27.png)