Home » Intel Manuals » Motherboards » Intel D915GUX » Manual Viewer

Intel D915GUX Product Specification - Page 12

Overview - ram

Get Intel D915GUX PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Intel Desktop Board D915GUX/D915GHA Technical Product Specification 1.2 Overview 1.2.1 Feature Summary Table 1 summarizes the major features of the Desktop Boards D915GUX and D915GHA. Table 1. Feature Summary Form Factor Processor Memory Chipset Video Audio I/O Control USB Peripheral Interfaces LAN Support BIOS Instantly Available PC Technology microATX Form Factor (9.60 inches by 9.60 inches [243.84 millimeters by 243.84 millimeters]) Support for an Intel® Pentium® 4 processor in an LGA775 socket with an 800 or 533 MHz system bus • Four 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets • Support for DDR2 533 MHz or DDR2 400 MHz DIMMs • Support for up to 4 GB of system memory Intel® 915G Chipset, consisting of: • Intel® 82915G Graphics Memory Controller Hub (GMCH) • Intel® 82801FB I/O Controller Hub (ICH6) • 4 Mbit Firmware Hub (FWH) Intel® GMA900 onboard graphics subsystem Intel® High Definition Audio subsystem using the Realtek ALC860 audio codec LPC Bus I/O controller Support for USB 2.0 devices • Eight USB ports • One serial port • One parallel port • Four Serial ATA interfaces • One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support • One diskette drive interface • PS/2* keyboard and mouse ports The board provides one of the following: • Gigabit (10/100/1000 Mbits/sec) LAN subsystem using the Marvell* Yukon* 88E8050 PCI Express* Gigabit Ethernet Controller • 10/100 Mbits/sec LAN subsystem using the Intel® 82562EZ Platform LAN Connect (PLC) device • Intel/AMI BIOS (resident in the 4 Mbit FWH) • Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, and SMBIOS • Support for PCI Local Bus Specification Revision 2.2 • Support for PCI Express Revision 1.0a • Suspend to RAM support • Wake on PCI, RS-232, front panel, PS/2 devices, and USB ports continued 12

Section	Page
Intel® Desktop Boards D915GUX/D915GHA Technical Product Specification	1
Revision History	2
Preface	3
Intended Audience	3
What This Document Contains	3
Typographical Conventions	3
Other Common Notation	4
Contents	5
1 Product Description	11
1.1 PCI Bus Terminology Change	11
1.2 Overview	12
1.2.1 Feature Summary	12
1.2.2 Manufacturing Options	13
1.2.3 Board Layout	14
1.2.4 Block Diagram	16
1.3 Online Support	17
1.4 Processor	17
1.5 System Memory	18
1.5.1 Memory Configurations	19
1.5.1.1 Dual Channel (Interleaved) Mode Configurations	20
1.5.1.2 Single Channel (Asymmetric) Mode Configurations	22
1.6 Intel® 915G Chipset	23
1.6.1 Intel 915G Graphics Subsystem	23
1.6.1.1 Intel® GMA900 Graphics Controller	23
1.6.1.2 Dynamic Video Memory Technology (DVMT)	24
1.6.1.3 Advanced Digital Display 2 (ADD2) Card Support	24
1.6.1.4 Configuration Modes	25
1.6.2 USB	25
1.6.3 IDE Support	25
1.6.3.1 Parallel ATE IDE Interface	25
1.6.3.2 Serial ATA Interfaces	26
1.6.3.3 SCSI Hard Drive Activity LED Connector (Optional)	26
1.6.4 Real-Time Clock, CMOS SRAM, and Battery	27
1.7 PCI Express Connectors	27
1.8 I/O Controller	27
1.8.1 Serial Ports	28
1.8.2 Parallel Port	28
1.8.3 Diskette Drive Controller	28
1.8.4 Keyboard and Mouse Interface	28
1.9 Audio Subsystem	29
1.9.1 Audio Subsystem Software	29
1.9.2 Audio Connectors	29
1.9.3 Intel® High Definition Audio Subsystem	30
1.10 LAN Subsystem	31
1.10.1 10/100 Mbits/sec LAN Subsystem	31
1.10.1.1 Intel® 82562EZ Physical Layer Interface Device	31
1.10.1.2 RJ-45 LAN Connector with Integrated LEDs	31
1.10.2 Gigabit LAN Subsystem	32
1.10.2.1 Marvell Yukon 88E8050 PCI Express 1.0a Integrated MAC/PHY Gigabit Ethernet Controller	32
1.10.2.2 RJ-45 LAN Connector with Integrated LEDs	32
1.10.3 Alert Standard Format (ASF) Support	33
1.10.4 Intel® Wireless Connect Technology (Optional)	33
1.10.5 LAN Subsystem Software	34
1.11 Hardware Management Subsystem	34
1.11.1 Hardware Monitoring and Fan Control ASIC	34
1.11.2 Thermal Monitoring	35
1.11.3 Fan Monitoring	35
1.11.4 Chassis Intrusion and Detection	36
1.12 Power Management	36
1.12.1 ACPI	36
1.12.1.1 System States and Power States	37
1.12.1.2 Wake-up Devices and Events	38
1.12.2 Hardware Support	38
1.12.2.1 Power Connector	39
1.12.2.2 Fan Connectors	39
1.12.2.3 LAN Wake Capabilities	39
1.12.2.4 Instantly Available PC Technology	40
1.12.2.5 Resume on Ring	40
1.12.2.6 Wake from USB	40
1.12.2.7 Wake from PS/2 Devices	40
1.12.2.8 PME# Signal Wake-up Support	40
1.12.2.9 WAKE# Signal Wake-up Support	41
1.12.2.10 +5 V Standby Power Indicator LED	41
1.13 Trusted Platform Module (Optional)	42
1.13.1 System Requirements	42
1.13.2 Warning of Potential Data Loss	42
1.13.3 Security Precautions	43
1.13.3.1 Password Procedures	43
1.13.3.2 Emergency Recovery File Back Up Procedures	44
1.13.3.3 Hard Drive Image Backup Procedures	44
1.13.3.4 Clear Text Backup (Optional)	44
1.13.4 Trusted Platform Module Ownership	44
1.13.5 Enabling the Trusted Platform Module	45
1.13.6 Assuming Trusted Platform Module Ownership	45
1.13.7 Recovery Procedures	46
1.13.7.1 Recovering from Hard Disk Failure	46
1.13.7.2 Recovering from Desktop Board or TPM Failure	46
1.13.8 Clearing Trusted Platform Module Ownership	47
1.13.9 Software Support	48
2 Technical Reference	49
2.1 Introduction	49
2.2 Memory Resources	49
2.2.1 Addressable Memory	49
2.2.2 Memory Map	51
2.3 DMA Channels	51
2.4 Fixed I/O Map	52
2.5 PCI Configuration Space Map	53
2.6 Interrupts	54
2.7 PCI Conventional Interrupt Routing Map	55
2.8 Connectors	56
2.8.1 Back Panel Connectors	56
2.8.2 Component-side Connectors	58
2.8.2.1 Power Supply Connectors	62
2.8.2.2 Add-in Card Connectors	63
2.8.2.3 Auxiliary Front Panel Power/Sleep LED Connector	64
2.8.2.4 Front Panel Connector	64
2.8.2.4.1 Hard Drive Activity LED Connector [Yellow]	65
2.8.2.4.2 Reset Switch Connector [Purple]	65
2.8.2.4.3 Power/Sleep LED Connector [Green]	65
2.8.2.4.4 Power Switch Connector [Red]	65
2.8.2.5 Front Panel USB Connectors	65
2.8.2.6 Front Panel IEEE 1394a Connectors (Optional)	66
2.9 Jumper Block	67
2.10 Mechanical Considerations	68
2.10.1 Form Factor	68
2.10.2 I/O Shield	69
2.11 Electrical Considerations	70
2.11.1 DC Loading	70
2.11.2 Add-in Board Considerations	70
2.11.3 Fan Connector Current Capability	70
2.11.4 Power Supply Considerations	71
2.12 Thermal Considerations	72
2.13 Reliability	74
2.14 Environmental	74
2.15 Regulatory Compliance	75
2.15.1 Safety Regulations	75
2.15.2 EMC Regulations	75
2.15.2.1 FCC Compliance Statement (USA)	76
2.15.2.2 Canadian Compliance Statement	76
2.15.3 European Union Declaration of Conformity Statement	76
2.15.4 Product Ecology Statements	77
2.15.4.1 Disposal Considerations	77
2.15.4.2 Recycling Considerations	77
2.15.5 Product Certification Markings (Board Level)	78
3 Overview of BIOS Features	79
3.1 Introduction	79
3.2 BIOS Flash Memory Organization	80
3.3 Resource Configuration	80
3.3.1 PCI Autoconfiguration	80
3.3.2 PCI IDE Support	80
3.4 System Management BIOS (SMBIOS)	81
3.5 Legacy USB Support	81
3.6 BIOS Updates	82
3.6.1 Language Support	82
3.6.2 Custom Splash Screen	82
3.7 Boot Options	83
3.7.1 CD-ROM Boot	83
3.7.2 Network Boot	83
3.7.3 Booting Without Attached Devices	83
3.7.4 Changing the Default Boot Device During POST	83
3.8 Fast Booting Systems with Intel® Rapid BIOS Boot	84
3.8.1 Peripheral Selection and Configuration	84
3.8.2 Intel Rapid BIOS Boot	84
3.9 BIOS Security Features	85
4 Error Messages and Beep Codes	87
4.1 BIOS Error Messages	87
4.2 Port 80h POST Codes	89
4.3 Bus Initialization Checkpoints	93
4.4 Speaker	94

Match case Limit results 1 per page

Intel Desktop Board D915GUX/D915GHA Technical Product Specification

1.2 Overview

1.2.1

Feature Summary

Table 1 summarizes the major features of the Desktop Boards D915GUX and D915GHA.

Table 1.

Feature Summary

Form Factor

microATX Form Factor (9.60 inches by 9.60 inches [243.84 millimeters by

243.84 millimeters])

Processor

Support for an Intel

Pentium

4 processor in an LGA775 socket with an 800 or

533 MHz system bus

Memory

•

Four 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets

•

Support for DDR2 533 MHz or DDR2 400 MHz DIMMs

•

Support for up to 4 GB of system memory

Chipset

Intel

915G Chipset, consisting of:

•

Intel

82915G Graphics Memory Controller Hub (GMCH)

•

Intel

82801FB I/O Controller Hub (ICH6)

•

4 Mbit Firmware Hub (FWH)

Video

Intel

GMA900 onboard graphics subsystem

Audio

Intel

High Definition Audio subsystem using the Realtek ALC860 audio codec

I/O Control

LPC Bus I/O controller

USB

Support for USB 2.0 devices

Peripheral

Interfaces

•

Eight USB ports

•

One serial port

•

One parallel port

•

Four Serial ATA interfaces

•

One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support

•

One diskette drive interface

•

PS/2* keyboard and mouse ports

LAN Support

The board provides one of the following:

•

Gigabit (10/100/1000 Mbits/sec) LAN subsystem using the Marvell* Yukon*

88E8050 PCI Express* Gigabit Ethernet Controller

•

10/100 Mbits/sec LAN subsystem using the Intel

82562EZ Platform LAN

Connect (PLC) device

BIOS

•

Intel/AMI BIOS (resident in the 4 Mbit FWH)

•

Support for Advanced Configuration and Power Interface (ACPI), Plug and Play,

and SMBIOS

Instantly Available

PC Technology

•

Support for PCI Local Bus Specification Revision 2.2

•

Support for PCI Express Revision 1.0a

•

Suspend to RAM support

•

Wake on PCI, RS-232, front panel, PS/2 devices, and USB ports

continued