Intel D915GUX Product Specification - Page 63
Add-in Card Connectors
View all Intel D915GUX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Technical Reference Table 28. ATX12V Power Connector Pin Signal Name 1 Ground 3 +12 V Pin Signal Name 2 Ground 4 +12 V Table 29. Alternate Power Connector Pin Signal Name 1 +12 V 2 Ground 3 Ground 4 +5 V 2.8.2.2 Add-in Card Connectors The board has the following add-in card connectors: • One PCI Express x16 connector supporting simultaneous transfer speeds up to 8 GBytes/sec. • One PCI Express x1 connector. The x1 interfaces support simultaneous transfer speeds up to 500 MBytes/sec. • Two PCI Conventional rev 2.2 compliant local bus slots. The SMBus is routed to PCI Conventional bus connector 2 only (ATX expansion slot 6). PCI Conventional bus add-in cards with SMBus support can access sensor data and other information residing on the Desktop Board. Note the following considerations for the PCI Conventional bus connectors: • All of the PCI Conventional bus connectors are bus master capable. • SMBus signals are routed to PCI Conventional bus connector 2. This enables PCI Conventional bus add-in boards with SMBus support to access sensor data on the boards. The specific SMBus signals are as follows: The SMBus clock line is connected to pin A40. The SMBus data line is connected to pin A41. NOTE The PCI Express x16 connector is configured to support only a PCI Express x1 link when the Intel GMA900 graphics controller is enabled. 63