Intel D915GUX Product Specification - Page 13
Manufacturing Options - power supply
View all Intel D915GUX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Product Description Table 1. Feature Summary (continued) Expansion Capabilities • Two PCI Conventional bus add-in card connectors (SMBus routed to PCI Conventional bus connector 2) • One PCI Express x1 bus add-in card connector • One PCI Express x16 bus add-in card connector Hardware Monitor Subsystem • Hardware monitoring and fan control ASIC • Voltage sense to detect out of range power supply voltages • Thermal sense to detect out of range thermal values • Three fan connectors • Three fan sense inputs used to monitor fan activity • Fan speed control 1.2.2 Manufacturing Options Table 2 describes the manufacturing options on the Desktop Boards D915GUX and D915GHA. Not every manufacturing option is available in all marketing channels. Please contact your Intel representative to determine which manufacturing options are available to you. Table 2. Manufacturing Options ATAPI CD-ROM Connector A connector for attaching an internal CD-ROM drive to the onboard audio subsystem IEEE-1394a Interface Intel® 82801FBW I/O Controller Hub (ICH6W) IEEE-1394a controller and three IEEE-1394a connectors (one back panel connector, two front-panel connectors) I/O controller Hub that supports Intel® Wireless Connect Technology (D915GUX board only) SCSI Hard Drive Activity LED Connector Allows add-in hard drive controllers (SCSI or other) to use the same LED as the onboard IDE controller. Serial Port B Second serial port accessible via a connector on the component side of the board S/PDIF Connector A 1 x 3 connector (mounted on the component side of the board) that provides digital audio signals in S/PDIF format For information about Available configurations for the Desktop Boards D915GUX and D915GHA Refer to Section 1.3, page 17 13