Intel DG41MJ Product Guide - Page 29

Remove the Processor from the Protective Processor Cover, Install the Processor

Get Intel DG41MJ - Desktop Board Classic Series Motherboard PDF manuals and user guides
UPC - 735858206907
View all Intel DG41MJ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Installing and Replacing Desktop Board Components 5. Remove the processor from the protective processor cover. Hold the processor only at the edges, being careful not to touch the bottom of the processor (Figure 9). Do not discard the protective processor cover. Always replace the processor cover if the processor is removed from the socket. Figure 9. Remove the Processor from the Protective Processor Cover 6. Hold the processor with your thumb and index fingers oriented as shown in Figure 10. Make sure your fingers align to the socket cutouts (Figure 10, A). Align notches (Figure 10, B) with the socket (Figure 10, C). Lower the processor straight down without tilting or sliding it in the socket. Figure 10. Install the Processor 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Installing and Replacing Desktop Board Components
29
5.
Remove the processor from the protective processor cover.
Hold the processor
only at the edges, being careful not to touch the bottom of the processor
(Figure 9).
Do not discard the protective processor cover.
Always replace the
processor cover if the processor is removed from the socket.
Figure 9.
Remove the Processor from the Protective Processor Cover
6.
Hold the processor with your thumb and index fingers oriented as shown in
Figure 10.
Make sure your fingers align to the socket cutouts (Figure 10, A).
Align
notches (Figure 10, B) with the socket (Figure 10, C).
Lower the processor straight
down without tilting or sliding it in the socket.
Figure 10.
Install the Processor