Intel SE7525RP2 Product Specification - Page 99

Intel® Server Board SE7320EP2 / Intel® Server Board SE7525RP2 TPS Error Logging Message Displayed Static Resource Conflict PCI I/O conflict PCI ROM conflict PCI IRQ conflict PCI IRQ routing table error Timer Error Interrupt Controller-1 error Interrupt Controller-2 error Description Two or more Static Devices are trying to use the same resource space (usually Memory or I/O). A PCI adapter generated an I/O resource conflict when configured by BIOS POST. A PCI adapter generated an I/O resource conflict when configured by BIOS POST. A PCI adapter generated an I/O resource conflict when configured by BIOS POST. BIOS POST (DIM code) found a PCI device in the system but was unable to figure out how to route an IRQ to the device. Usually this error is causing by an incomplete description of the PCI Interrupt Routing of the system. Indicates an error while programming the count register of channel 2 of the 8254 timer. This may indicate a problem with system hardware. BIOS POST could not initialize the Master Interrupt Controller. This may indicate a problem with system hardware. BIOS POST could not initialize the Slave Interrupt Controller. This may indicate a problem with system hardware. Table 60. CMOS BIOS Messages Message Displayed CMOS Date/Time Not Set CMOS Battery Low CMOS Settings Wrong CMOS Checksum Bad Description The CMOS Date and/or Time are invalid. This error can be resolved by readjusting the system time in AMIBIOS Setup. CMOS Battery is low. This message usually indicates that the CMOS battery needs to be replaced. It could also appear when the user intentionally discharges the CMOS battery. CMOS settings are invalid. This error can be resolved by using AMIBIOS Setup. CMOS contents failed the Checksum check. Indicates that the CMOS data has been changed by a program other than the BIOS or that the CMOS is not retaining its data due to malfunction. This error can typically be resolved by using AMIBIOS Setup. Message Displayed Keyboard Error PS2 Keyboard not found PS2 Mouse not found Keyboard/Interface Error Unlock Keyboard System Halted Table 61. Miscellaneous BIOS Messages Description Keyboard is not present or the hardware is not responding when the keyboard controller is initialized. PS2 Keyboard support is enabled in the BIOS setup but the device is not detected. PS2 Mouse support is enabled in the BIOS setup but the device is not detected. Keyboard Controller failure. This may indicate a problem with system hardware. PS2 keyboard is locked. User needs to unlock the keyboard to continue the BIOS POST. The system has been halted. A reset or power cycle is required to reboot the machine. This message appears after a fatal error has been detected. Revision 1.0 99 Intel order number D24635-001