Intel SR1530HAHLX User Guide - Page 69

Installing and Removing a Hot-Swap SATA Drive, SR1530HAHLX - hot swappable drive carriers

Get Intel SR1530HAHLX - Server System - 0 MB RAM PDF manuals and user guides View all Intel SR1530HAHLX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Installing and Removing a Hot-Swap SATA Drive (SR1530HAHLX) Up to three hot swappable SATA drives can be installed. The HDD0 drive bay is at the left side of the chassis, The HDD1 drive bay is in the middle of the chassis, underneath the optional optical drive. The HDD2 drive bay is at the right side of the chassis. The drives do not need to be installed in order; HDD1 can be installed before HDD0. Cautions: If you install less than three drives or devices, the empty drive bays must be occupied by carriers with baffles to maintain proper system cooling. Note: The server system does not support all hard drives. See "Server System References" on page x for an Internet link to a list of supported hardware. Installing a Hot-Swap SATA Drive (SR1530HAHLX) 1. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel". 2. Locate the drive position you want to use. See Figure 38. HDD 0 HDD 1 HDD 2 AF001582 Figure 38. Locating Drive Positions (SR1530HAHLX) Intel® Server System SR1530AH / SR1530AHLX / SR1530HAHLX 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
Intel
®
Server System SR1530AH / SR1530AHLX / SR1530HAHLX
47
Installing and Removing a Hot-Swap SATA Drive
(SR1530HAHLX)
Up to three hot swappable SATA drives can be installed. The HDD0 drive bay is at the left
side of the chassis, The HDD1 drive bay is in the middle of the chassis, underneath the
optional optical drive. The HDD2 drive bay is at the right side of the chassis. The drives
do not need to be installed in order; HDD1 can be installed before HDD0.
Cautions:
If you install less than three drives or devices, the empty drive bays must be occupied by
carriers with baffles to maintain proper system cooling.
Note:
The server system does not support all hard drives. See
“Server System References” on
page x
for an Internet link to a list of supported hardware.
Installing a Hot-Swap SATA Drive (SR1530HAHLX)
1.
Remove the front bezel if it is installed. For instructions, see
“Removing the Front
Bezel”
.
2.
Locate the drive position you want to use. See
Figure 38
.
Figure 38. Locating Drive Positions (SR1530HAHLX)
AF001582
HDD 0
HDD 1
HDD 2