Intel SR1530HAHLX User Guide - Page 94

Replacing the Power Supply (SR1530AH / SR1530AHLX) Caution: The power supply is NOT hot swappable. Before removing or replacing the power supply, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. The power supply can be replaced if it fails or if one of the fans that is integrated into it fails. To replace the power supply, use the following instructions. 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Server System Cover". 4. Disconnect all power cables connected to the server board and peripherals. See Figure 66: - A: 2x4 power connector - B: 2x12 main power connector - C: Daisy-chain cable to: ✧ Optical drive power connector, if an optical drive is installed ✧ HDD0 power connector, if a hard drive is installed here ✧ HDD1 power connector, if a hard drive is installed here 72 Intel® Server System SR1530AH / SR1530AHLX / SR1530HAHLX