Intel SR1530HAHLX User Guide - Page 82
Installing and Removing the PCI Riser Assembly
![]() |
View all Intel SR1530HAHLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Installing and Removing the PCI Riser Assembly Caution: The PCI riser assembly is NOT hot swappable. Before removing or replacing the PCI riser assembly, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. Removing the PCI Riser Assembly To remove the PCI riser assembly, use the following instructions. 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Server System Cover" on page 28. 4. Disconnect any cables attached to any add-in cards. 5. Lift riser assembly up to remove it. Use caution to gently easy the riser card from the add-in card slot so you do not damage the slot or the riser card. See Figure 57. AF000673 Figure 57. Removing PCI Riser Assembly from the Server System 6. If you need to add or replace a PCI riser connector, see "Installing or Replacing a PCI Riser Card" on page 62. 60 Intel® Server System SR1530AH / SR1530AHLX / SR1530HAHLX
![](/manual_guide/products/intel-sr1530ah-user-guide-11ce3bf/82.png)