Intel SR1530HAHLX User Guide - Page 87

Removing a PCI Add-in Card

Get Intel SR1530HAHLX - Server System - 0 MB RAM PDF manuals and user guides View all Intel SR1530HAHLX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

5. Remove the screw at the rear of the riser assembly. See letter "A" in Figure 61. Save this screw. You will reinstall it later. 6. If a filler panel is installed over the opening at the rear of the riser assembly lift it from the riser assembly. See letter "B" in the figure. Save the filler panel in case you later need to remove the add-in card. 7. Insert the add-in card into the socket in the riser assembly. Push the add-in card into place firmly until it seats in the riser card connector, but use caution so you do not twist or bend the card. See letter "C" in the figure. 8. Re-install the screw you removed in step 5. See letter "A" in the figure. B C A Figure 61. Installing an Add-In Card AF000674 9. Install the PCI riser assembly into the server system. For instructions, see "Installing the PCI Riser Assembly" on page 61. 10. Install the server system cover. For instructions, see "Installing the Server System Cover". 11. Plug all peripheral devices and the AC power cable into the server. Removing a PCI Add-in Card 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Server System Cover" on page 28. 4. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 60. Intel® Server System SR1530AH / SR1530AHLX / SR1530HAHLX 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
Intel
®
Server System SR1530AH / SR1530AHLX / SR1530HAHLX
65
5.
Remove the screw at the rear of the riser assembly. See letter “A” in
Figure 61
.
Save this screw. You will reinstall it later.
6.
If a filler panel is installed over the opening at the rear of the riser assembly lift it
from the riser assembly. See letter “B” in the figure. Save the filler panel in case
you later need to remove the add-in card.
7.
Insert the add-in card into the socket in the riser assembly. Push the add-in card into
place firmly until it seats in the riser card connector, but use caution so you do not
twist or bend the card. See letter “C” in the figure.
8.
Re-install the screw you removed in step 5. See letter “A” in the figure.
Figure 61. Installing an Add-In Card
9.
Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 61
.
10.
Install the server system cover. For instructions, see
“Installing the Server System
Cover”
.
11.
Plug all peripheral devices and the AC power cable into the server.
Removing a PCI Add-in Card
1.
Observe the safety and ESD precautions at the beginning of this book. See
“Safety
Information” on page iii
.
2.
Power down the server and unplug all peripheral devices and the AC power cable.
3.
Remove the server system cover. For instructions, see
“Removing the Server
System Cover” on page 28
.
4.
Remove the PCI riser assembly. For instructions, see
“Removing the PCI Riser
Assembly” on page 60
.
B
C
A
AF000674