Intel SR1550AL User Guide - Page 53

Installing the Heat Sinks

Get Intel SR1550AL - Server System - 0 MB RAM PDF manuals and user guides View all Intel SR1550AL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Note: Make sure the alignment triangle mark and the alignment triangle cutout align correctly. 8. Remove the protective socket cover (see Figure 27). Note: Retain the protective socket cover for use when removing a processor that will not be replaced. A B TP02076 Figure 27. Removing the Socket Cover 9. Lower the CPU load plate and lower the socket lever completely. Installing the Heat Sink(s) The heat sink has Thermal Interface Material (TIM) located on the bottom of it. Use caution when you unpack the heat sink so you do not damage the TIM. 1. Set the heat sink over the processor, lining up the four captive screws with the four posts surrounding the processor. 2. Loosely screw in the captive screws on the heat sink corners in a diagonal manner. Do no fully tighten one screw before tightening another. 3. Gradually and equally tighten each captive screw until each is firmly tightened. 3 2 1 4 TP02328 Figure 28. Installing the Heat Sink Intel® Server System SR1550AL/SR1550ALSAS User's Guide 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
Intel
®
Server System SR1550AL/SR1550ALSAS User’s Guide
33
Note:
Make sure the alignment triangle mark and the alignment triangle cutout align correctly.
8.
Remove the protective socket cover (see
Figure 27
).
Note:
Retain the protective socket cover for use when removing a processor that will not be
replaced.
Figure 27. Removing the Socket Cover
9.
Lower the CPU load plate and lower the socket lever completely.
Installing the Heat Sink(s)
The heat sink has Thermal Interface Material (TIM) located on the bottom of it. Use
caution when you unpack the heat sink so you do not damage the TIM.
1.
Set the heat sink over the processor, lining up the four captive screws with the four
posts surrounding the processor.
2.
Loosely screw in the captive screws on the heat sink corners in a diagonal manner.
Do no fully tighten one screw before tightening another.
3.
Gradually and equally tighten each captive screw until each is firmly tightened.
Figure 28. Installing the Heat Sink
TP02076
A
B
TP02328
2
3
1
4