Intel SR1550AL User Guide - Page 96
Installing and Removing the Rack Handles
![]() |
View all Intel SR1550AL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Installing and Removing the Rack Handles Installing the Rack Handles 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Chassis Cover". 4. Align the rack handle with the two holes on the side of the server system as shown in the figure below. 5. Attach the rack handle to the server system with two screws as shown in the figure below. AF000377 Figure 69. Installing the Rack Handle 6. Install the server system cover. For instructions, see "Installing the Server System Cover". 7. Install the front bezel. For instructions, see "Installing the Front Bezel". 8. Plug all peripheral devices and the AC power cable into the server. Removing the Rack Handles 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable. 76 Intel® Server System SR1550AL/SR1550ALSAS User's Guide
![](/manual_guide/products/intel-sr1550al-user-guide-13ca15c/96.png)