Intel SR1550AL User Guide - Page 77
Installing and Removing the RAID Battery, Backup Unit BBU
View all Intel SR1550AL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Installing and Removing the RAID Battery Backup Unit (BBU) Installing the RAID Battery Backup Unit 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Chassis Cover". 4. Remove the power distribution board cover. For instructions, see "Replacing the Power Distribution Module". 5. Open the RAID battery backup unit cover (see letter "A") and connect the cable as shown (see letter "B"). 6. Insert the RAID battery backup unit into the server system and slide back until it locks into place as shown in the figure below (see letter "C"). 7. Attach the cable from the rear of the RAID battery backup unit to the mid-plane board as shown (see letter "D"). D C A B Figure 49. Installing the RAID Battery Backup Unit TP02257 8. Install the power distribution board cover. For instructions, see "Replacing the Power Distribution Module". 9. Install the server system cover. For instructions, see "Installing the Server System Cover". Intel® Server System SR1550AL/SR1550ALSAS User's Guide 57