Intel SR1550AL User Guide - Page 59
Removing a Slimline Optical Drive or Internal USB Floppy
View all Intel SR1550AL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
TP02234 Figure 33. Installing an Optical Drive Assembly into the Server System 10. Insert IDE ribbon cable through slot in fan module. 11. Plug cable ends into matching sockets on backplane and server board. Make sure the cable does not restrict fan module air flow. 12. Install the server system cover. For instructions, see "Installing the Server System Cover". 13. (Optional) Install the front bezel. For instructions, see "Removing and Installing the Front Bezel". 14. Plug all peripheral devices and the AC power cable into the server. Removing a Slimline Optical Drive or Internal USB Floppy 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel". 4. Remove the server system cover. For instructions, see "Removing the Chassis Cover". 5. Press the blue release lever (see letter "A") to unlock the optical drive tray and remove the slimline optical drive tray assembly from the server system as shown in Figure 34. Intel® Server System SR1550AL/SR1550ALSAS User's Guide 39