Intel SR1550AL User Guide - Page 86
Replacing the Power Distribution Module
![]() |
View all Intel SR1550AL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Replacing the Power Distribution Module To replace the power distribution module, use the following instructions. 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Chassis Cover". 4. Remove the hot-swap power supply/supplies. For instructions, see "Replacing or Adding a Power Supply". 5. Remove the screw to release the power distribution board cover (see letter "A"). 6. Lift the power distribution board cover from the server system (see letter "B"). A B TP02228 Figure 57. Removing the Power Distribution Board Cover 7. Disconnect power from the system boards. 8. Remove the power distribution board by sliding the board to the right and lifting. 9. Install a new power distribution board by lining up the standoffs to the holes in the power distribution board and sliding the board to the left. 10. Reconnect the power connections to the system boards. 66 Intel® Server System SR1550AL/SR1550ALSAS User's Guide
![](/manual_guide/products/intel-sr1550al-user-guide-13ca15c/86.png)