Intel SR1550AL User Guide - Page 78
Removing the RAID Battery Backup Unit
View all Intel SR1550AL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
10. Plug all peripheral devices and the AC power cable into the server. Removing the RAID Battery Backup Unit 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Chassis Cover". 4. Remove the power distribution board cover. For instructions, see "Replacing the Power Distribution Module". 5. Remove the cable from the rear of the RAID battery backup unit and the mid-plane board as shown in the figure below (see letter "A"). 6. Slide the RAID battery backup unit forward and lift from the server system (see letter "B"). A B TP02258 Figure 50. Removing the RAID Battery Backup Unit 7. Install the power distribution board cover. For instructions, see "Replacing the Power Distribution Module". 8. Install the server system cover. For instructions, see "Installing the Server System Cover". 9. Plug all peripheral devices and the AC power cable into the server. 58 Intel® Server System SR1550AL/SR1550ALSAS User's Guide