Intermec CV30 CV30 Fixed Mount Computer User's Manual - Page 15
Using the Power Button, Magnifying a Portion of the Screen, Adjusting the Screen Brightness, Power
View all Intermec CV30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Chapter 1 - Using the CV30 Fixed Mount Computer Using the Power Button When you press the Power ( ) button to turn off the CV30, you actually put the CV30 into Suspend mode. In Suspend mode, the CV30 continues to supply power to all memory, but turns off power to most hardware. When you press the Power button to turn the CV30 back on, the computer resumes where it was when you turned it off. You can configure the CV30 to turn off if not used for a specified period of time by going to Start > Settings > the System tab > Power > the Advanced tab. When a CV30 is suspended and resumes, the 802.11 connection requires reauthentication. Magnifying a Portion of the Screen You can use the Zoom button to magnify a portion of the screen if you need to see details. To zoom in on a portion of the screen • Press the Zoom ( ) button and tap on the area of the screen you want to see. Adjusting the Screen Brightness You may want to adjust the brightness depending on the location of the CV30. Use the Brightness button on the CV30 front panel to control the brightness of the screen. The Brightness button also toggles the backlight on and off. To toggle the backlight on and off • Press and release the Brightness ( ) button. To adjust the screen brightness • Press and hold the Brightness button until you achieve the desired level of brightness. When you press and hold the Brightness button, it increases the brightness until you reach the highest setting. It then cycles to the lowest setting and increases the setting as you hold the button. You can also adjust the brightness settings by going to Start > Settings > the Systems tab > Backlight or by using Intermec Settings. CV30 Fixed Mount Computer User's Manual 5