Intermec CV30 CV30 Fixed Mount Computer User's Manual - Page 16
Adjusting the Volume, Using the Touch Screen, Changing the Beeper Volume
View all Intermec CV30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Chapter 1 - Using the CV30 Fixed Mount Computer Adjusting the Volume You can change the CV30 volume, for sounds you hear when you tap the screen or scan bar codes with a scanner, to adjust to your needs and the environment. You can set the volume to off, low, medium, medium-high, high, and very high (default). Use the following table to understand the different ways to adjust the volume. Changing the Beeper Volume Way to Adjust Volume Procedure Use the front panel button. Press the Volume Up ( )or Volume Down ( )button to increase or decrease the volume. Use Intermec Settings. From the Start menu, choose Settings, select the System tab, and then double-click Intermec Settings. Go to Device Settings > Beeper > Volume. Tap Speaker ( taskbar. ) icon in the Use the stylus to move the speaker slider up or down. You can also turn the volume on or off. You can also set the number of beeps you hear when you scan a bar code with a Bluetooth or tethered scanner. For help setting the number of beeps, see "Connecting a Scanner" on page 13. Using the Touch Screen The CV30 has a 6.4 inch color VGA touch screen display with a resolution of 640 x 480 pixels. The touch screen has a built-in heater to reduce condensation on the external surface of the display when moving between sub-freezing temperatures and normal temperatures. If you are going to use the CV30 in extreme cold conditions (0°C to -30°C or 32°F to -22°F) for an extended period of time, you should turn on the power at room temperature for at least 15 minutes prior to using it. This process of "warming up" the CV30 helps preserve the lighting on the display. 6 CV30 Fixed Mount Computer User's Manual