Intermec CV30 CV30 Fixed Mount Computer User's Manual - Page 43
Configuring the CV30 to Communicate With a Wireless Scanner, Start, Settings, System
View all Intermec CV30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 3 - Configuring the CV30 Bluetooth Settings Setting Power Discoverable Connectable Class of Device IBT Radio Device Address Description Set and view whether the Bluetooth radio is on or off. Allows other Bluetooth devices to be able to discover the CV30 during a device discovery. Allows other Bluetooth devices to connect to your CV30. Determines how the device appears to other devices during discovery. Displays the version of the Intermec Bluetooth Library. Displays the version of the Bluetooth Radio Hardware. Displays the Bluetooth address of your CV30. Configuring the CV30 to Communicate With a Wireless Scanner This section explains how to configure the CV30 to communicate with Bluetooth wireless scanners. The CV30 ships with a Bluetooth association label attached to the left side. Scan the association label to quickly connect the CV30 to the Bluetooth wireless scanner. If for some reason the Bluetooth association label does not work, you can follow the procedure for configuring the CV30 from Intermec Settings at the end of this section. To configure Bluetooth communications on the CV30 1 Select Start > Settings > the System tab > Intermec Settings. 2 Select Communications > Bluetooth. 3 If you want to allow incoming connections from wireless scanners, you must enable these two parameters: • Discoverable • Connectable If you do not want to allow incoming connections, make sure both parameters are disabled. 4 Save your changes and exit Intermec Settings. CV30 Fixed Mount Computer User's Manual 33