Intermec CV30 CV30 Fixed Mount Computer User's Manual - Page 41
Setting Up Ethernet Communications, Remotely Configuring the CV30 Using SmartSystems Foundation
View all Intermec CV30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 3 - Configuring the CV30 Navigating in Intermec Settings To Do This Function Select or expand a command Select text in a text box Save settings Do This Tap the command Tap in the text box and drag the stylus over the text Tap File > Save Settings or tap the disk icon ( ). Remotely Configuring the CV30 Using SmartSystems Foundation The SmartSystems™ server lets you manage all your SmartSystems-enabled devices at the same time from a central host PC. The CV30 ships with the SmartSystems client, which means it is SmartSystems enabled. The SmartSystems server has a console that displays all of the CV30s in your network. In the console, you can right-click a CV30 and a menu appears. To configure the CV30, choose Intermec Settings from the menu. The SmartSystems server and console are part of SmartSystems Foundation and are available from the Intermec web site. To download SmartSystems Foundation, go to www.intermec.com/ SmartSystems. For information on how to use the SmartSystems server, see the online manual. Setting Up Ethernet Communications You can use the CV30 directly in an Ethernet network by connecting the network to the RJ45 10BaseT/100BaseT full duplex connector on the bottom of the CV30. To use the CV30 in an Ethernet network 1 Go to Start > Settings > the Systems tab > Intermec Settings. 2 If you have a DHCP server, enable DHCP. or If you do not have a DHCP server, set these parameters: • IP address • Subnet mask CV30 Fixed Mount Computer User's Manual 31